eBuricacid Uric Acid Control Solution

1 vial 5ml control solution for the eBuricacid meter

The eBuricacid uric acid control solution is not needed for the set up or routine operation of the uric acid meter.

The purpose of the control solution is to validate the performance of the eBuricacid uric acid meter using a testing solution with a known level of uric acid concentration.

When should you use the control solution?

Use the control solution if you wish to check or verify the accuracy of the meter or if you suspect that there is a problem with either the meter or the test strips.

Key features of eBuricacid uric acid control solution

• Control solution pack containing 1 vial of 5ml eBuricacid meter control solution
  
• eBuricacid control solution only works in the eBuricacid blood meter sold separately
• Use the control solution within 3 months of opening the sealed pack

Using the eBuricacid control solution 

• The acceptable range for the control solution is indicated on each package of test strips.
• The specified control solution range is applicable only to the eBuricacid brand of Uric Acid Control Solution.
• Always verify the expiration date and avoid using expired control solution.
• Upon opening a new bottle of eBuricacid control solution, remember to label it with the date of opening.
• Dispose of any unused control solution after the expiration date or within three months of opening, whichever comes first.
• After use, store the control solution in the refrigerator; do not freeze.
• Before reusing the control solution, let it sit at room temperature for at least 30 minutes.
• Avoid touching the tip of the control solution bottle to the test strip.
• Do not apply a second drop of control solution to the test strip.
• Immediately replace the cap on the control solution bottle after use.